Show simple item record

dc.contributor.authorAbdellah A
dc.contributor.authorBaierl D
dc.contributor.authorFabel B
dc.contributor.authorLugli P
dc.contributor.authorScarpa G
dc.contributor.editor
dc.date2017-08-22T00:00:00Z
dc.date.accessioned2018-02-07T13:37:11Z
dc.date.available2018-02-07T13:37:11Z
dc.date.issued2009
dc.identifier.isbn978-1-4398-1783-4
dc.identifier.urihttp://hdl.handle.net/10863/4216
dc.description.abstractWe report the implementation and testing of an airbrush coating system for the fabrication of a variety of organic electronic and optoelectronic devices using a commercially available airbrush unit. Our setup was implemented inside a glove box in order to allow the entire fabrication process of the test devices to be performed under nitrogen atmosphere. Several devices such as organic photodetectors, organic light-emitting diodes and organic thin-film transistors were fabricated using commercially available polymers (such as MEH-PPV, P3HT and PCBM). IV-characteristics, as well as film morphology and roughness of spray coated devices were compared to those of spin coated devices with similar architecture. Although films deposited by spray coating showed a considerably higher surface roughness, the corresponding devices are capable of achieving performances comparable to those of spin coated devices.en_US
dc.language.isoenen_US
dc.publisherCRC Pressen_US
dc.rights
dc.subjectSpray-coatingen_US
dc.subjectOrganic thin-film transistorsen_US
dc.subjectOrganic photovoltaicsen_US
dc.subjectOrganic photodetectorsen_US
dc.subjectOrganic light emitting diodesen_US
dc.titleSpray-coating deposition for large area organic thin-film devicesen_US
dc.typeBook chapteren_US
dc.date.updated2017-08-23T14:02:43Z
dc.publication.titleTechnical proceedings of the 2009 NSTI Nanotechnology Conference and Expo: Nanotech Conference & Expo 2009; Volume 2
dc.language.isiEN-GB
dc.description.fulltextopenen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record