Browsing Free University of BozenBolzano (unibz) by Title
Now showing items 2140 of 10211

A 2.62 MHz 762 uW cascode amplifier in flexible aIGZO thinfilm technology for textile and wearableelectronics applications
(IEEE, 2013)This paper presents a cascode amplifier for bendable analog and radiofrequency electronic systems in a flexible amorphous indium gallium zinc oxide (aIGZO) TFT technology, featuring a minimum gate length of 5 μm. The ... 
20.3dB 0.39mW AM Detector with SingleTransistor Active Inductor in Bendable aIGZO TFT
(IEEE, 2016)This paper presents an AM detector circuit in a bendable aIGZO TFT technology. The circuit is based on a commonsource stage loaded with a singleended active inductor, which uses only one active transistor. This active ... 
2275. Vian, Ojep Antone
(Editrice Bibliografica, 2013) 
25 years of Hyperschool and the need for a shared educational technologies lexicon
(2019)The article introduces a critical reflection upon the technological skills of training professionals. This is the starting point to reach the final aim consisting of arranging a simple but potentially radical operative ... 
26th International Symposium on Temporal Representation and Reasoning (TIME 2019)
(Schloss Dagstuhl  LeibnizZentrum für Informatik, 2019) 
2ATAs make DLs easy
(CEURWS.org, 2002)In this paper we demonstrate that twoway alternating automata on infinite trees (2ATAs) provide a very elegant and effective formal tool for addressing reasoning in expressive DLs. Indeed, the encoding of a DL concept (to ... 
2D Thin Film Temperature Sensors Fabricated onto 3D Nylon Yarn Surface for Smart Textile Applications
(2013)We report on micro fabrication methods used to integrate electronics into smart textiles. We have introduced a shadow mask fabrication method to pattern 2D thin film structures onto the 3D surface of yarn. We have demonstrated ... 
2D to cylindrical inverse projection of the wireless capsule endoscopy images
(IEEE, 2011)In this paper, a twodimensional to threedimensional mapping of the wireless capsule endoscopy (WCE) images is proposed as well as the alignment of the consecutive images. The aim of this project is to reduce the diagnosis ... 
3D erls based dynamic formulation for flexiblelink robots: Theoretical and numerical comparison between the finite element method and the component mode synthesis approaches
(2018)The industrial demand for highperformance and low energy consume has highlighted the need to develop lightweight manipulators and robots. However, their design and control result more difficult with respect to rigidlink ... 
3D hydrodynamic modelling of flood impacts on a building and indoor flooding processes
(COPERNICUS GESELLSCHAFT MBH, 2016)Given the current challenges in flood risk management and vulnerability assessment of buildings exposed to flood hazards, this study presents threedimensional numerical modelling of torrential floods and its interaction ... 
3D numerical approach to simulate the overtopping volume caused by an impulse wave comparable to avalanche impact in a reservoir
(COPERNICUS GESELLSCHAFT MBH, 2015)The impact of an avalanche in a reservoir induces impulse waves, which pose a threat to population and infrastructure. For a good approximation of the generated wave height and length as well as the resulting overtopping ... 
3D Percolative ModelBased Multiscale Simulation of Randomly Aligned Networks of Carbon Nanotubes
(Institute of Electrical and Electronics Engineers Inc., 2016)A carbon nanotube (CNT) network is an aggregate of nanotubes with different properties, which is randomly deposited over a certain substrate. The way the CNTs are physically arranged gives the electrical behavior of the ... 
3Dnumerical Investigation of the OutflowHydrograph for Dam Failure
(SPRINGER VIEWEGSPRINGER FACHMEDIEN WIESBADEN GMBH, 2014)The flood wave characteristic originating from of a dam break is of basic relevance for the extent and impact of flood wave propagation and the issue of evacuation plans. By applying 3D numerical simulations with the FLOW3D ... 
A 360deg Digital Image Correlation system for materials testing
(2016)The increasing research interest toward natural and advanced engineered materials demands new experimental protocols capable of retrieving highly dense sets of experimental data on the fullsurface of samples under multiple ... 
360deg fullfield measurement of steel specimens under combined tension/torsion loads
(HeriotWatt University, 2015)In this work we present a system to perform fullfield measurement over the 360 degrees surface of a round specimen during combined tensiontorsion tests. Measurements are performed by a camera mounted on a slewing ring ... 
3D digital models for a widespread museum: the Renon’s “bauernhöfe”.
(2019)The aim of the paper is to study the characteristics of different 3D digital models (point clouds, mesh, CSG, BIM) for the realization of a museum of historical buildings widespread in the territory of South Tyrol through ... 
3D modeling of CNT networks for sensing applications
(Institute of Electrical and Electronics Engineers Inc., 2014)A novel numerical 3Dmodel for simulations of random networks of carbon nanotubes is presented. This new algorithm takes into account the real 3D nature of these networks, allowing a better understanding of their electrical ... 
A 3D selfconsistent percolative model for ACDC electrical analysis of carbon nanotubes networks
(Institute of Electrical and Electronics Engineers Inc., 2015)We present a SPICEbased percolative model for the simulation of randomly aligned networks of carbon nanotubes (CNT). The network generation is based on a stochastic algorithm that randomly generates nanotubes over a ... 
3D selfconsistent percolative model for networks of randomly aligned carbon nanotubes
(Institute of Physics Publishing, 2015)A numerical percolative model for simulations of random networks of carbon nanotubes is presented. This algorithm takes into account the real 3D nature of these networks, allowing for a better understanding of their ...