Abstract
The welding of dissimilar joints is very common in systems used in oil exploration and production in deep waters. This commonly involves welding low carbon steel pipes with valves, pumps or other pipes, all of them made of alloy steel. Inconel has been used in such welding as filler material; however, this welding is preceded by a process of buttering in the low alloy steel side and a stress relief heat treatment. An alternative technique presented in this paper is the use of a welding filler metal that, during the cooling process, undergoes a martensitic transformation at a relatively low temperature, so that the resulting deformation processing offsets the contraction that occurs as a result of the cooling process. This study evaluates the application of Maraging 250 weld in a dissimilar joint of the oil industry. Tests were performed on joints of ASTM steels A516 grade 70 and AISI 8630M welded with Maraging 250. The residual stress profiles, hardness, microstructure, tensile strength and impact energy absorbed were evaluated. The welded joint with Maraging 250 showed a high intensity of compressive residual stress. The microstructure of different welding regions was analysed and compared.