Abstract
Coarse sediment transported by steep mountain tributaries during channelized flash flood events with intense bed load transport poses a significant threat to life, property, and infrastructure. Intense bedload transport occurring in tributary channels and insufficient transport capacity of the main channel flow can provoke flooding at the confluence. Deposition in the confluence can lead to overbank flooding and sedimentation into adjacent settlement areas. Extensive research has been carried out investigating lowland river confluences, where it has been determined that the confluence angle and discharge ratio have the most significant influence on channel morphology and hydraulics. However, there is a lack of information concerning confluences with low width and discharge ratios, high sediment concentrations, and gradients, typically found in steep mountain channels. This study presents results from large-scale laboratory experiments coupled with numerical modelling with a standardized river confluence geometry. Bedload transport capacities, the shape, and volume of the deposition zone in the confluence, bedload dispersion characteristics, hydraulic and morphological dynamics, and spatial boundaries were analysed for various discharges and sediment concentrations. The confluence angle was 90°, sediment concentration was 5%, 7.5%, and 10%, and the discharge ratio was 0.1. The model was designed to accommodate scale factors of 20–40. With this configuration, a set of experiments based on steady-state hydraulic conditions was accomplished. Results show that when the discharge ratio and confluence angle are constant, different morphologies occur, indicating that in addition to the confluence angle and the discharge ratio, the sediment concentration, flow velocity, and unit stream power significantly impact both hydraulic and morphologic zones in the confluences of mountain rivers. Additionally, backwater effects upstream of the confluence, and sedimentation in the tributary channel increases with increasing sediment concentration, which not only influences confluence morphodynamics and hydraulics but also the potential for overbanking of both channels.